Hey Timmy, that’s a good looking line up you have there! The Bergs are a great bike, especially that particular model, I ride with a few blokes that have them and have even raced them. A few years...

Thanks for the post Matt. I scored a full fairing off one of Barreda’s bikes from the Morocco Rally a few years ago. It’s a nice piece of wall art indeed�� I had a look at these listings and have...

Hey, I would definitely start with making sure the valves are adjusted correctly. What you describe is certainly a symptom of bad valve clearances, which can lead to bigger problems. I had almost...

Hey Bill, I’m not sure about how successful machining the OEM triple clamp might be... you may have to be the “test pilot” for this approach!!
When I converted my front end I had my suspension...

Hi Brock115, there’s a flat area machined into the case on the left side of the engine close to the gear shifter shaft. You’ll see the engine number there.
Cheers

Hey Bill, I’m going to join this conversation again, since I have had my own experience with the Power Commander and auto tune. I completely agree with Tim, don’t bother with the Power Commander...

Hi Bill, I don’t recall any modifications being necessary when the GPR was fitted to my GS. I didn’t fit it, I had my mechanic do that as it was in for servicing anyway. I’ll check the throttle cable...

Hi Bill, yes the damper made a significant difference to my GS. I would rate it in the top three modifications I have done to that bike.... the other two being a Power Commander and the Wilbers...

Hi Bil, regarding the steering damper I can definitely recommend the GPR V4. I have one on my G450 and my 1200GSA. They work extremely well and after 8+ years I have had no issues with either bike....

Hey Timmy, been too long!! I hope you’re doing ok. Thanks for the hot tip on those fuel pumps, I have mine on the way.
Quick update on my bike... it’s still in a million pieces and the engine is at...

Hey Ashley, I had exactly the same problem with mine, and so did a friend of mine. I don’t know why it effects the way the bike runs but when the rear harness earthed in the sub frame the engine...

Hi all, thanks again for all your contributions!! I haven’t touched the bike since we brought it home broken. A series of injuries (nothing to do with riding) have resulted in a pretty shitty year....

Hey Barry, I have the full set up on my bike so let me know if I can help with anything. Personally I didn’t have any issues at all fitting the tank and supplied exhaust. The only real advice I have...

Hey guys, firstly I agree Tim, I’m fairly certain there was cavitation taking place. The oil looked like it had been aerated!
Now when I turn the engine over by hand it gurgles out of the breather...

Hey Matt, thanks for the encouragement. It never ceases to amaze me how people that don’t ride just assume that failing is a reason to quit! I ain’t ready to give up yet!! This engine is the second...

Hey y’all! So last weekend was our “Condo 750” Rally. Preparations for this year included dealing with my on-going issue of too much oil getting past the “ZipTy/Toxic Racing engine breather and catch...

Hi Evert, the kit came with a new oil filter housing cap that has an inlet and outlet barbed fittings to connect the two hoses to. The outlet hose has an in-line oil filter that’s a common KTM part...

Hey Pascal, thanks for your input, always appreciated!!
I’ll post the results whichever way I decide to go with it.
Regards
Chris

Hi Evert, thanks for your input. Luckily with my bike the oil return line and fittings into the pump screen plug are well protected by the bash plate. Part of my issue is that I also run an oil...

Hey fellas, been a while since I was on the forum, life has a habit of taking over sometimes!!
I hope everyone had a great Christmas and are all off to a flying start for 2019. It’s been a...

Ya that's the one..... way cheaper than OEM, and they're pretty specific about it being a straight swap, so I suppose I should trust it

G'day chaps, just wondering if anyone has attempted one of these fuel pump swaps?? These are the pump motor only, not the whole assembly, and are supposed to be a direct swap for the OEM pump, at a...

My son just sent me some pics he took, the first of which was Saturday night's open heart surgery...

321025
321033
321041

Cheers Dom! It put a smile on my face when the photographer showed it to me!!
He took another cool shot last year, which my two older kids gave to an artist to do a rendering for my 50th birthday a...

Hi all, so we had our annual two-day navigation Rally last weekend. Although my fuel pump died on Saturday we managed to fit the spare on Saturday night and raced the 500km on Sunday. I should have...